Print This Coupon and Save.

15 Point Furnace Inspection

1. Inspect the heat exchanger.                                             10.   Check the thermostat for proper operation.
2. Oil all motors and bearings as needed.                             11.   Check the pilot burner / electrode.
3. Check all electrical connections.                                      12.   Test the pilot safety.
4. Clean the drain lines.                                                       13.   Test and setup the humidifier.
5. Check the condensate pump(if applicable).                      14.   Discuss the overall operation & condition of
6. Test the high limit safety.                                                           the equipment with homeowner.
7. Inspect the flue pipe.                                                       15.    Discuss overall operation & condition of         
8. Adjust the burner for efficient operation.                                   equipment with homeowner.
9. Inspect the furnace filter or air cleaner.                                                                                              

9 Point Gas Fireplace Inspection

1. Clean the logs.                                                                 6.   Clean oxygen sensor (Vent Free).
2. Clean the burner.                                                              7.   Test pilot safety.
3. Clean the glass.                                                                8.   Test powerpile output.
4. Clean the pilot.                                                                 9.   Check wire connections.
5. Test the ignition for delay.